2x 3157 4157 Load Resistor Fix Hyper Flash For Switchback LED Turn Signal Light
To Fix Switchback LED error code or fast blinking issues related to the low current draw when using LED bulbs upgrading the halogen bulbs.
This can be installed on 3157 3357 LED bulbs for turn signal light with no annoying rapid flashing nor error message/code on your car dashboard.
One Pair(2 pieces) load resistors for 3157 Switchback led bulbs with wire adapters
Build-In with 50W 6-Ohm Double Load Resistors
Solve error message on dash board and headlight flickering issue
Cross reference: 3157 3357 3457AK, 3357ALL, 4114K, 3157X, 3057KLCP, 3757AK
Voltages: 12V, Wattage: 50W
Easy Installation , No mechanic require.
-Solution for “bulb out signal” / “OBC error message” after installing SMD LED light bulb
-Solution for fast turn signal blinking response after installing SMD LED light bulb
Load resistor might cause heat when at work, please do not touch it or mount on any plastic materials.
– This is a 3 Locking Tabs Connector, Please Confirm That your Factory Connector is 3 Locking Tabs.
– The LED bulbs have lower power consumption; European brand name of cars may need to tap on Load Resistors to remove the error code on dashboard For CAN-BUS Bulbs
– When using LED bulbs for turn signal, you will need to use the above load resistor or decoder set to prevent hyper flash or bulb malfunction.
– If the LED does not light up, simply flip it 180 degrees (reverse the polarity)
*We offer 100% customer satisfaction.
*We fully stand behind with all the items that we are selling!
*Please check our stores for other car and truck parts.
*Please leave us positive feedback if you are satisfied with the item.
*But in case you aren’t satisfied the item, please kindly let us know, we will try our best to solve it.
*Thank you for reading.
Click below linkage to buy the item on Amazon and eBay